Three Phase Chaff Cutter 6 Tons / Hr

Chaff Cutting Requirements for Large Dairy ,Gaushalas,feed mills and poultry, and Fish Farms where Three Phase electric power connection available to run the motor..

3 in 1 machine (Chaff cutter,pulverizer and chipper)

            For big Dairy or Goat Farm with, 100 to 2000 cows or 3000 Goats, has the feed requirement from 10 Tons to 40 Tons/day and for Goat farm 5000 Kg / day respectively.

This machine designed to run with Three phase 7.5hp electric motor. This machine is one of our higher output model to suit large capacity animal farm needs. For small or big Gaushalas with 250 to 2500 cows or big Dairy farms with more than 100 animals means this model is the only suitable one.

This model mainly used for big Dairy farms, gaushalas, pulverizing mills where three phase current available for motor run.

As an additional facility in this machine hard chipping support for organic farming and vermi composting. You can cut 6 inches diameter coconut leafs or 1.5 inches diameter any tree branches to make compost which is farmers own fertilizers.

  • 1. Can Run with Three Phase Current only.
  • 2. Very less Maintenance
  • 3. Sharpening of Cutting edges once in 6 months
  • 4. No Spares required upto 18 months for daily operation.
  • 5. Mainly need 2 persons for feeding 6 tons per hour.


7.5hp motor operated chaff cutter cum pulverizer with 6 Tons per hour Green fodder chaff cutting and 750 kg/hour maize pulverizing.

Technical Specifications:
1. Power requirement : Three Phase 7.5hp or 10hp
2. Chaff Cutting Output : 6000 Kg / Hour
3. Pulverizing Output : 750 Kg / Hour
4. Chipping of agro waste : 1000 kg/hour
5. Recommended For : 100 to 2000 Animals Dairy Farms,500 or 2000 animals Gaushalas,
Flour pulverizing mills. Chipping of agro wastes.
6. Number of Cutting Edges : 4 Nos
7. Screens Available : 2mm, 3mm & 5mm